OX-WS2(2in1 Wifi Doorbel and Wifi Battery Camera)

  • Brand   YQYWR
  • Model   OX-WS2
  • Description

    OX-WS2(2in1 Wifi Doorbel and Wifi Battery Camera),wifi video doorbell,wifi doorbell,wifi video doorp...

Detail

2 in 1 Wifi Doorbel and Wifi Battery Camera

Resolution :1080P/ 2 million pixels

Battery :7650 Mah polymer lithium battery, charge voltage: 5v2a

Operating System :Linux

Image Sensor :1/3 million pixel CMOS

Minimum Illuminance :Color 0.6 lux@f1.2, black and white 0. $number lux@f1.2, 0 Lux ir Open

Day And Night Conversion Mode :Ir-cut Double Filter Automatic Switch

Lens :2.8MM Million HD Lens

Video Compression Standard :H. 264, support for dual-code flow

Video Mode :HD/SD

Maximum Image Size :Main code flow 1920x1080; Sub stream: 640x480;

Frame Rate :25 Frames

Audio encoding :G726, G711, AAC, MP3 format, 8K sampling rate, support echo cancellation function

Audio Input :Built-in mic

Audio Output :Built-in speakers

Standby :Built-in MCU to support the true standby function, support infrared, key, GPIO alarm wake-up system; system standby Power 60uA

Wireless Frequency :2.4GHzIEEE 802.11b/g/n

Storage :Support Micro SD card storage, maximum 32GB

Intelligent Alarm: PIR Human Temperature Detection

Infrared Light :4 infrared light, 850nm, effective distance of 10 meters

Standby Time :5 Months

Power :0.75W (work) 0.0025W (Standby)

Working Environment :–10°c~60°c/20%~85% (non condensation)

APP:Microshare

Product Parameters:

Operating System

Linux

Image Sensor

1/3 million pixel CMOS

Minimum Illuminance

Color 0.6 lux@f1.2, black and white 0. $number lux@f1.2, 0 Lux ir Open

Day And Night Conversion Mode

Ir-cut Double Filter Automatic Switch

Lens

2.8MM Million HD Lens

Video Compression Standard

H. 264, support for dual-code flow

Video Mode

HD/SD

Maximum Image Size

Main code flow 1920x1080; Sub stream: 640x480;

Resolution

1080P: 2 million pixels

Frame Rate

25 Frames

Audio encoding

G726, G711, AAC, MP3 format, 8K sampling rate, support echo cancellation function

Audio Input

Built-in mic

Audio Output

Built-in speakers

Standby

Built-in MCU to support the true standby function, support infrared, key, GPIO alarm wake-up system; system standby Power 60uA

Wireless Frequency

2.4GHzIEEE 802.11b/g/n

Storage

Support Micro SD card storage, maximum 32GB

Intelligent Alarm

PIR Human Temperature Detection

Battery

7650 Ma polymer lithium battery, charge voltage: 5v2a

Infrared Light

4 infrared light, 850nm, effective distance of 10 meters

Standby Time

5 Months

Power

0.75W (work) 0.0025W (Standby)

Working Environment

10°c~60°c/20%~85% (non condensation)

FAQ

Q:wifi battery Doorbell is unabl to connect to Wifi network

A: 1. Doorbell is only availale to 2.4G router in stgad of 5G router.

2. Please check whether the wifi  router runs normally or not,then confirm the DHCP router,

And set WPA2 PSK W PA-PSK and AES encryption.

3. Please keep Door Bell and wifi routers distance within 15 meters. Otherwise, Owing to the weak

Wifi signal, the device connects to network unsuccessfully.

  4. Poor Wifi signal may cause the connection fails.You can also configure the wifi signal amplifiers,

Extend wifi signal distances and exist wireless network coverage. For more information, you can

Follow Wifi signal amplifier manual

  5. Please ennsure your WLAN password is connect when configuring the device. We suggest your

WLAN name and password had better not contain special

Characters, such as space, comma, period etc, which may not be recognized by the camera.

  6. The characters of wifi routers name and password need to within 16 charaters.

  7. Please disable the routers MAC address filtering. (if you enable MAC address filter, please add to

Allow on the wireless MAC address list of camera)

  8. Please try to reset the wifi router before configuring the device to get a better network environment

  9. Restore factory settings, and follow the to try again,

  10. If the device still doesnt work, please change another wireless network to have a double test

(Perhaps the network operators break down result in connection fails)

 

Certificates:

Company information

Shenzhen Ouxiang Electonics Co., Ltd.,Was borned in the Chinese biggest Electronics Industries City -Shenzhen,.Which is a high-tech corporation was founded in Sep of 1998, with 300 staffs, and a factory of 5000 quare meters We are professional on Security Product.
Our products have sold to over 80 countries and areas. Approved CE, Rohs, FCC, UL, ISO9001, CCC etc. Stable quality and professional service have won kinds of long time cooperation agents and distributors.

Welcome to visit our company and our factory!

Warranty &Return Policy

1. We provide 1 year warranty.
2. All items must be returned in their original condition, in order to qualify for a refund or exchange of goods.
3. The buyer is responsible for all shipping costs incurred. Please contact us before leaving any negative or neutral feedback.
4. We will work with you to solve any problems.
5.OEM/ODM is welcome.


more